Berner AS. Dorer/meisel

Punch, Pin, 3/16' point, 5 1/4'

Art.nr PPC106A

ØAdditional Description: The anvil end on heads on Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. �

Punch, Pin, 5/32' point, 5'

Art.nr PPC105A

Punch, Pin, Long, 5/32' point, 6 1/2'

Art.nr PPC105LA

ØAdditional Description: The anvil end on heads on Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. �

Bronsedor Ø19mm - Lengde 25cm lang

Art.nr PPB1002A

Punch, Drift, Bronze, 13/16' point, 12'

Art.nr PPB1226A

Punch, Drift, Bronze, 1/2' point, 8'

Art.nr PPB816A

Punch, Drift, Bronze, 13/16' point, 8'

Art.nr PPB826A

Punch, Pin, 3/32' point, 4 7/32'

Art.nr PPC103A

Punch, Pin, 1/8', 4 3/4'

Art.nr PPC104A

ØAdditional Description: The anvil end on heads on Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. �

Punch, Pin, 7/32' point, 5 1/4'

Art.nr PPC107A

Punch, Starter, 5/32' point, 6'

Art.nr PPC205A

Meisel 19mm, 20 cm lang, Snap-on

Art.nr PPC828B

ØAdditional Description: The anvil end on heads on Snap-on® punches and chisels are machined to a modified parabolic curve. This design directs the striking force to the center of the tool head to allow slow metal displacement. The parabolic curve controls mushrooming to reduce chipping and splitting. Heads should be re-dressed to their original shape with hand files as necessary. The tough steel alloy is machined and differentially heat treated for optimum performance. The hardness of the striking head is reduced to help toughness and add qualities that result in a slower mushrooming of the striking surface. �